English
Zurcon® U-Cup RU6 - RU6301050-Z25
SAP Article number: 200000202813
Additional to the machined seals Stepseal® 2K and Rimseal for housings ISO 7425/2 (rubber energized plastic seals) the U-Cup RU6 has been developed as an injection molded seal of polyurethane material to fit in the same ISO housings. The integrated NBR O-Ring (only available for series RU62 - RU64) improves the performance at low pressure and low temperature applications. Polyurethane (Zurcon® Z20) is a proven material for U-cups due to their good mechanical properties.
Rod/U-Cup:
SAP Article number200000202813
TSS Article Number (3 to 9)6301050
Signature StandardRU6301050-Z25
Quality (10th Digit)-
Compound codeZ25
Groove Diameter Inside105 mm
Groove Diameter Outside120.50 mm
Groove Width6.30 mm
Article GroupRU
Material Information for the product(s) on this page
Z25
Zurcon_Z25_enZ25 Engineering Data Sheet_Ed1_rev0
Material Type:
PUR
Maximum Temperature:
130
Gravity Tolerance:
+/-0.02
Material:
Z25
Shore A Hardness:
95+/- 3
Gravity Unit:
g/cm³
Specific Gravity:
1.2
Hardness Tolerance:
+/- 3
Color:
Black
Minimum Temperature:
-35
Minimum Hardness:
95
Material Code Class:
Thermoplastic
Maximum Hardness:
95
Hardness unit:
Shore A