English
Zurcon® U-Cup RU6 - RU6403500-Z20N
Additional to the machined seals Stepseal® 2K and Rimseal for housings ISO 7425/2 (rubber energized plastic seals) the U-Cup RU6 has been developed as an injection molded seal of polyurethane material to fit in the same ISO housings. The integrated NBR O-Ring (only available for series RU62 - RU64) improves the performance at low pressure and low temperature applications. Polyurethane (Zurcon® Z20) is a proven material for U-cups due to their good mechanical properties.
Rod/U-Cup:
TSS Article Number (3 to 9)6403500
Signature StandardRU6403500-Z20N
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter350 mm
Root Groove Outside Diameter371 mm
Compound codeZ20N
Root Groove Width8.10 mm
Groove Diameter Inside350 mm
Groove Diameter Outside371 mm
Groove Width8.10 mm
Article GroupRU
Material Information for the product(s) on this page
N7083
Color:
Black
Hardness unit:
Shore A
Hardness Tolerance:
+/- 5
Gravity Tolerance:
+/-0.02
Maximum Temperature:
100
Shore A Hardness:
70+/- 5
Material:
N7083
Minimum Hardness:
70
Maximum Hardness:
70
Minimum Temperature:
-30
Gravity Unit:
g/cm³
Material Type:
NBR
Specific Gravity:
1.24
Material Code Class:
Elastomer
Z20
Color:
Turquoise
Shore A Hardness:
93+/- 3
Specific Gravity:
1.2
Material Code Class:
Thermoplastic
Material:
Z20
Hardness Tolerance:
+/- 3
Minimum Hardness:
93
Hardness unit:
Shore A
Minimum Temperature:
-35
Material Type:
PUR
Maximum Temperature:
110
Maximum Hardness:
93
Gravity Unit:
g/cm³
Gravity Tolerance:
+/-0.02