Turcon® Excluder® 5 - WE5100450-M12V

Designed to be a double-acting seal the Turcon® Excluder® 5 is an excellent scraper for the use together with back-pumping seals such as Turcon® Stepseal® 2K and the Zurcon® Rimseal.

Availability: In Stock

€ 20,04
Price (per piece)
1-9 € 20,04
10-24 € 16,38
25-49 € 15,62
50-99 € 13,71
100-249 € 11,96
250-499 € 10,58
500+ € 10,10

Installation Dimensions:

Rod Diameter, dN f8/h9
45.0  mm
Groove Diameter, D3 H9
53.8  mm
Groove Width, L3 +0.2
6.3  mm
Bore Diameter, D4 H11
46.5  mm
Step Width, a min.
3.0  mm
Radius, r1 max.
0.8  mm

O-Ring:

O-Ring Dimensions
48.90 x 2.62  mm
O-Ring TSS Part No.
ORAR00135  

Quality & Norms:

Comply with the recommendations of ISO 3320
yes  
Installation in grooves according to ISO 6195 Type D
yes  

Seal Capabilities:

Min. Temperature
-10.0  °C
Max. Temperature
200.0  °C
Speed max.
15.0  m/s
installation drawing table

Material Information for the product(s) on this page WE5100450-M12V

M12

Material Data Sheet (PDF) Only available for the registered users.
Colour
dark grey
Basic Material
PTFE
Filler
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.

V7

Material Data Sheet (PDF) Only available for the registered users.
Colour
green
Basic Material
FKM
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V