TG3000100-T10

Double-acting Turcon® Roto Glyd Ring® is used to seal shafts, axles, cylinder bores, rotary manifolds, and swivels with rotary, helical or oscillating movement. It consists of a seal ring in high-grade PTFE material activated by an elastomeric O-Ring. The contact surface profile of the seal ring is specially designed for use at high-pressure and low sliding speeds. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.

Roto-GlydRing®Turcon®:

Ring Diameter Outside12.70 mm

Ring Diameter Inside10 mm

TSS Article Number (3 to 9)3000100

Signature StandardTG3000100-T10

Type of Article0

Quality (10th Digit)-

Root Groove Thickness2.45 mm

Root Groove Inside Diameter10 mm

Root Groove Outside Diameter14.90 mm

Root Ring Inside Diameter10 mm

Compound codeT10

Root Groove Width2.20 mm

Ring Length0 mm

Groove Diameter Inside10 mm

Groove Diameter Outside14.90 mm

Groove Width2.20 mm

Groove Thickness2.45 mm

Ring Thickness1.35 mm

Ring Width2 mm

Legacy ID from KOM2TG3000100-T10

Root Ring Width2 mm

Root Ring Outside Diameter12.70 mm

Root Ring Length0 mm

Article GroupTG

Root Ring Thickness1.35 mm

Seals Helsingor Material Class:

Seal Tube OD Tolerance From14 mm

Material Number200000007784

Seal Tube OD Tolerance Max16 mm

Seal Tube ID Tolerance Min-16 mm

Seal Tube ID Tolerance Max-1.30 mm

Seal Tube OD Tolerance To28.70 mm

Seal Tube ID Tolerance To8.70 mm

Seal Tube ID Tolerance From-6 mm

Class Dependencies200000007784

Compound Type110

Seal Tube OD Tolerance Min1.30 mm

Material Information for the product(s) on this page

T10

Material Code Class:

Thermoplastic

Gravity Unit:

g/cm³

Minimum Temperature:

-200

Gravity Tolerance:

+0.03/-0.02

Material Type:

PTFE

Maximum Temperature:

260

Material:

T10

Specific Gravity:

2.07

Color:

Black

Turcon® Roto Glyd Ring® - Without O-Ring (Shaft) - TG3000100-T10