Turcon® Roto Glyd Ring® - Incl. O-Ring (Shaft) - TG3000160-T40V
Double-acting Turcon® Roto Glyd Ring® is used to seal shafts, axles, cylinder bores, rotary manifolds, and swivels with rotary, helical or oscillating movement. It consists of a seal ring in high-grade PTFE material activated by an elastomeric O-Ring. The contact surface profile of the seal ring is specially designed for use at high-pressure and low sliding speeds. Available in Turcon® or Zurcon® materials.
Roto-GlydRing®Turcon®:
Ring Diameter Inside0 mm
TSS Article Number (3 to 9)3000160
Signature StandardTG3000160-T40V
Type of Article0
Quality (10th Digit)-
Root Groove Thickness2.20 mm
Root Groove Outside Diameter20.90 mm
Root Ring Inside Diameter16 mm
Compound codeT40V
Groove Diameter Inside16 mm
Groove Diameter Outside20.90 mm
Groove Width2.20 mm
Groove Thickness0 mm
Article GroupTG
Material Information for the product(s) on this page
V70GA
Shore A Hardness:
70+/- 5
Material Code Class:
Elastomer
Maximum Hardness:
70
Minimum Temperature:
-20
Specific Gravity:
2.02
Material:
V70GA
Hardness Tolerance:
+/- 5
Gravity Unit:
g/cm³
Minimum Hardness:
70
Material Type:
FKM
Color:
Green
Hardness unit:
Shore A
Maximum Temperature:
200
Gravity Tolerance:
+/-0.03
T40
Material:
T40
Ball Hardness:
27
Minimum Temperature:
-200
Material Type:
PTFE
Specific Gravity:
2.07
Maximum Temperature:
260
Material Code Class:
Thermoplastic
Gravity Tolerance:
+/-0.03
Gravity Unit:
g/cm³
Color:
Grey