TG3000180-T40

Double-acting Turcon® Roto Glyd Ring® is used to seal shafts, axles, cylinder bores, rotary manifolds, and swivels with rotary, helical or oscillating movement. It consists of a seal ring in high-grade PTFE material activated by an elastomeric O-Ring. The contact surface profile of the seal ring is specially designed for use at high-pressure and low sliding speeds. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.

Roto-GlydRing®Turcon®:

TSS Article Number (3 to 9)3000180

Signature StandardTG3000180-T40

Type of Article0

Quality (10th Digit)-

Root Groove Thickness2.45 mm

Root Groove Inside Diameter18 mm

Root Groove Outside Diameter22.90 mm

Root Ring Inside Diameter18 mm

Root Groove Width2.20 mm

Ring Length0 mm

Groove Diameter Inside18 mm

Groove Diameter Outside22.90 mm

Groove Width2.20 mm

Groove Thickness2.45 mm

Ring Thickness1.35 mm

Ring Width2 mm

Legacy ID from KOM2TG3000180-T40

Root Ring Width2 mm

Root Ring Outside Diameter20.70 mm

Root Ring Length0 mm

Article GroupTG

Root Ring Thickness1.35 mm

Seals Helsingor Material Class:

Seal Tube OD Tolerance From22 mm

Material Number200000060655

Seal Tube OD Tolerance Max16 mm

Seal Tube ID Tolerance Min-16 mm

Seal Tube ID Tolerance Max-1.30 mm

Seal Tube OD Tolerance To36.70 mm

Seal Tube ID Tolerance To16.70 mm

Seal Tube ID Tolerance From2 mm

Class Dependencies200000060655

Ring Diameter Outside20.70 mm

Compound codeT40

Ring Diameter Inside18 mm

Compound Type110

Seal Tube OD Tolerance Min1.30 mm

Material Information for the product(s) on this page

T40

Material:

T40

Ball Hardness:

Minimum Temperature:

-200

Material Type:

PTFE

Specific Gravity:

2.07

Maximum Temperature:

260

Material Code Class:

Thermoplastic

Gravity Tolerance:

+/-0.03

Gravity Unit:

g/cm³

Color:

Grey

Turcon® Roto Glyd Ring® - Without O-Ring (Shaft) - TG3000180-T40