TG3200450-T10

Double-acting Turcon® Roto Glyd Ring® is used to seal shafts, axles, cylinder bores, rotary manifolds, and swivels with rotary, helical or oscillating movement. It consists of a seal ring in high-grade PTFE material activated by an elastomeric O-Ring. The contact surface profile of the seal ring is specially designed for use at high-pressure and low sliding speeds. Available in Turcon® or Zurcon® materials. The O-Ring is not included with this item.

Roto-GlydRing®Turcon®:

TSS Article Number (3 to 9)3200450

Signature StandardTG3200450-T10

Type of Article0

Quality (10th Digit)-

Root Groove Thickness5.50 mm

Root Groove Inside Diameter45 mm

Root Groove Outside Diameter56 mm

Root Ring Inside Diameter45 mm

Root Groove Width4.20 mm

Ring Length0 mm

Groove Diameter Inside45 mm

Groove Diameter Outside56 mm

Groove Width4.20 mm

Groove Thickness5.50 mm

Ring Thickness3.25 mm

Ring Width3.93 mm

Legacy ID from KOM2TG3200450-T10

Root Ring Width3.93 mm

Root Ring Outside Diameter51.50 mm

Root Ring Length0 mm

Article GroupTG

Root Ring Thickness3.25 mm

Seals Helsingor Material Class:

Seal Tube OD Tolerance From52.80 mm

Material Number200000062863

Seal Tube OD Tolerance Max16 mm

Seal Tube ID Tolerance Min-16 mm

Seal Tube ID Tolerance Max-1.30 mm

Seal Tube OD Tolerance To67.50 mm

Seal Tube ID Tolerance To43.70 mm

Seal Tube ID Tolerance From29 mm

Class Dependencies200000062863

Ring Diameter Outside51.50 mm

Compound codeT10

Ring Diameter Inside45 mm

Compound Type110

Seal Tube OD Tolerance Min1.30 mm

Material Information for the product(s) on this page

T10

Material Code Class:

Thermoplastic

Gravity Unit:

g/cm³

Minimum Temperature:

-200

Gravity Tolerance:

+0.03/-0.02

Material Type:

PTFE

Maximum Temperature:

260

Material:

T10

Specific Gravity:

2.07

Color:

Black

Turcon® Roto Glyd Ring® - Without O-Ring (Shaft) - TG3200450-T10