English
Turcon® Roto Glyd Ring® S - Without O-Ring (Shaft) - TG5100400-Z54
SAP Article number: 200000218141
Turcon® Roto Glyd Ring® S is used to seal rotary transmission lead-throughs journals, swivels and with rotary or oscillating movement. The seal is double-acting and can be exposed to pressure from one, or both, sides. It consists of a seal ring of Turcon® material and is activated by an O-Ring as an elastic energizing element. The contact surface profile of the seal ring is specially designed for use with high pressures and at low sliding speeds. The O-Ring is not included with this item.
Roto-GlydRing®Turcon®:
SAP Article number200000218141
TSS Article Number (3 to 9)5100400
Signature StandardTG5100400-Z54
Type of Article0
Quality (10th Digit)-
Root Groove Thickness3.75 mm
Root Groove Inside Diameter40 mm
Root Groove Outside Diameter47.50 mm
Root Ring Inside Diameter40 mm
Root Groove Width3.20 mm
Groove Diameter Inside40 mm
Groove Diameter Outside47.50 mm
Groove Width3.20 mm
Groove Thickness3.75 mm
Ring Thickness1.57 mm
Ring Width3 mm
Legacy ID from KOM2TG5100400-Z54
Root Ring Width3 mm
Root Ring Outside Diameter43.14 mm
Article GroupTG
Root Ring Thickness1.57 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From44.44 mm
Material Number200000218141
Seal Tube OD Tolerance Max16 mm
Seal Tube ID Tolerance Min-16 mm
Seal Tube ID Tolerance Max-1.30 mm
Seal Tube OD Tolerance To59.14 mm
Seal Tube ID Tolerance To38.70 mm
Seal Tube ID Tolerance From24 mm
Class Dependencies200000218141
Ring Diameter Outside43.14 mm
Compound codeZ54
Ring Diameter Inside40 mm
Compound Type110
Seal Tube OD Tolerance Min1.30 mm
Material Information for the product(s) on this page
Z54
Zurcon Z54 material specificationZ54 Engineering DataZ54
Color:
Turquoise
Material Type:
PUR
Minimum Temperature:
-45
Gravity Tolerance:
+/-0.02
Specific Gravity:
1.16
Gravity Unit:
g/cm³
Material:
Z54
Maximum Temperature:
110
Material Code Class:
Thermoplastic
Maximum Hardness:
58
Hardness Tolerance:
+/- 4
Hardness unit:
Shore D
Shore D Hardness:
58+/- 4
Minimum Hardness:
58