English
Turcon® Roto Glyd Ring® S - Without O-Ring (Shaft) - TG5201100-Z53
SAP Article number: 200000222984
Turcon® Roto Glyd Ring® S is used to seal rotary transmission lead-throughs journals, swivels and with rotary or oscillating movement. The seal is double-acting and can be exposed to pressure from one, or both, sides. It consists of a seal ring of Turcon® material and is activated by an O-Ring as an elastic energizing element. The contact surface profile of the seal ring is specially designed for use with high pressures and at low sliding speeds. The O-Ring is not included with this item.
Roto-GlydRing®Turcon®:
SAP Article number200000222984
TSS Article Number (3 to 9)5201100
Signature StandardTG5201100-Z53
Type of Article0
Quality (10th Digit)-
Root Groove Thickness5.50 mm
Root Groove Inside Diameter110 mm
Root Groove Outside Diameter121 mm
Root Ring Inside Diameter110 mm
Root Groove Width4.20 mm
Groove Diameter Inside110 mm
Groove Diameter Outside121 mm
Groove Width4.20 mm
Groove Thickness5.50 mm
Ring Thickness2.52 mm
Ring Width3.90 mm
Legacy ID from KOM2TG5201100-Z53
Root Ring Width3.90 mm
Root Ring Outside Diameter115.04 mm
Article GroupTG
Root Ring Thickness2.52 mm
Seals Helsingor Material Class:
Seal Tube OD Tolerance From117.04 mm
Material Number200000222984
Seal Tube OD Tolerance Max50 mm
Seal Tube ID Tolerance Min-50 mm
Seal Tube ID Tolerance Max-2 mm
Seal Tube OD Tolerance To165.04 mm
Seal Tube ID Tolerance To108 mm
Seal Tube ID Tolerance From60 mm
Class Dependencies200000222984
Ring Diameter Outside115.04 mm
Compound codeZ53
Ring Diameter Inside110 mm
Compound Type110
Seal Tube OD Tolerance Min2 mm
Material Information for the product(s) on this page
Z53
Shore D Hardness:
70+/- 6
Hardness unit:
Shore D
Material:
Z53
Material Type:
PUR
Material Code Class:
Thermoplastic
Gravity Tolerance:
+/-0.02
Gravity Unit:
g/cm³
Minimum Temperature:
-45
Maximum Hardness:
70
Color:
Yellow to Light-Brown
Specific Gravity:
1.18
Minimum Hardness:
70
Hardness Tolerance:
+/- 6
Maximum Temperature:
110