English
Type TRP - TRP000195-N8MMR
Radial Oil Seals TRP are seals with a completely rubber-covered outer diameter. This type of seal is designed for pressures up to 0.5 MPa. In order to avoid "pop-out" of the seal, we suggest to fit an axial retainer (e.g. circlip, shoulder, etc.) The additional dust lip protects the main sealing lip against dust and other fine solid contaminants and therefore this type is recommended for use in polluted environments. To achieve a long lifetime, a suitable lubricant between the two sealing lips should be applied. The outer diameter can be provided flat or waved.
Rotary/Rad.OilSeal-metr.:
TSS Article Number (3 to 9)P000195
Signature StandardTRP000195-N8MMR
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter19.50 mm
Root Groove Outside Diameter30 mm
Compound codeN8MMR
Groove Diameter Inside19.50 mm
Groove Diameter Outside30 mm
Ring Thickness6 mm
Article GroupTR
Root Ring Thickness6 mm
Material Information for the product(s) on this page
N8MMR
Hardness unit:
Shore A
Color:
Black
Minimum Hardness:
80
Shore A Hardness:
80+/- 5
Gravity Unit:
g/cm³
Gravity Tolerance:
+/-0.02
Hardness Tolerance:
+/- 5
Maximum Hardness:
80
Maximum Temperature:
100
Material Type:
NBR/metal
Minimum Temperature:
-25
Specific Gravity:
1.3
Material:
N8MMR
Material Code Class:
Rubber Metal Bond