English
Type TRP - TRP000350-E7MWR
Radial Oil Seals TRP are seals with a completely rubber-covered outer diameter. This type of seal is designed for pressures up to 0.5 MPa. In order to avoid "pop-out" of the seal, we suggest to fit an axial retainer (e.g. circlip, shoulder, etc.) The additional dust lip protects the main sealing lip against dust and other fine solid contaminants and therefore this type is recommended for use in polluted environments. To achieve a long lifetime, a suitable lubricant between the two sealing lips should be applied. The outer diameter can be provided flat or waved.
Rotary/Rad.OilSeal-metr.:
TSS Article Number (3 to 9)P000350
Signature StandardTRP000350-E7MWR
Type of Article0
Quality (10th Digit)-
Root Groove Inside Diameter35 mm
Root Groove Outside Diameter52 mm
Compound codeE7MWR
Groove Diameter Inside35 mm
Groove Diameter Outside52 mm
Ring Thickness6 mm
Article GroupTR
Root Ring Thickness6 mm
Material Information for the product(s) on this page
E767R
Minimum Hardness:
70
Material:
E767R
Material Type:
EPDM
Shore A Hardness:
70+/- 5
Specific Gravity:
1.14
Maximum Temperature:
150
Maximum Hardness:
70
Gravity Tolerance:
+/-0.02
Material Code Class:
Elastomer
Color:
Black
Hardness Tolerance:
+/- 5
Hardness unit:
Shore A
Gravity Unit:
g/cm³
Minimum Temperature:
-45