English
Type TRP - TRP100400-4N022
SAP Article number: 200000206578
Radial Oil Seals TRP are seals with a completely rubber-covered outer diameter. This type of seal is designed for pressures up to 0.5 MPa. In order to avoid "pop-out" of the seal, we suggest to fit an axial retainer (e.g. circlip, shoulder, etc.) The additional dust lip protects the main sealing lip against dust and other fine solid contaminants and therefore this type is recommended for use in polluted environments. To achieve a long lifetime, a suitable lubricant between the two sealing lips should be applied. The outer diameter can be provided flat or waved.
Rotary/Rad.OilSeal-metr.:
SAP Article number200000206578
TSS Article Number (3 to 9)P100400
Signature StandardTRP100400-4N022
Quality (10th Digit)-
Compound code4N022
Groove Diameter Inside40 mm
Groove Diameter Outside62 mm
Ring Thickness6 mm
Article GroupTR
Material Information for the product(s) on this page
NCT52
Hardness Tolerance:
+/- 5
Gravity Tolerance:
+/-0.03
Minimum Temperature:
-30
Specific Gravity:
1.33
Gravity Unit:
g/cm³
Maximum Hardness:
75
Hardness unit:
Shore A
Color:
Black
Minimum Hardness:
75
Maximum Temperature:
100
Material:
NCT52
Shore A Hardness:
75+/- 5
Material Type:
NBR
Material Code Class:
Elastomer