English
Type TRP - TRP100400-N7MWR
SAP Article number: 200000103924
Radial Oil Seals TRP are seals with a completely rubber-covered outer diameter. This type of seal is designed for pressures up to 0.5 MPa. In order to avoid "pop-out" of the seal, we suggest to fit an axial retainer (e.g. circlip, shoulder, etc.) The additional dust lip protects the main sealing lip against dust and other fine solid contaminants and therefore this type is recommended for use in polluted environments. To achieve a long lifetime, a suitable lubricant between the two sealing lips should be applied. The outer diameter can be provided flat or waved.
Rotary/Rad.OilSeal-metr.:
SAP Article number200000103924
TSS Article Number (3 to 9)P100400
Signature StandardTRP100400-N7MWR
Quality (10th Digit)-
Compound codeN7MWR
Groove Diameter Inside40 mm
Groove Diameter Outside62 mm
Ring Thickness6 mm
Article GroupTR
Material Information for the product(s) on this page
N767R
Minimum Hardness:
70
Gravity Unit:
g/cm³
Hardness unit:
Shore A
Material Code Class:
Elastomer
Shore A Hardness:
70+/- 5
Material Type:
NBR
Specific Gravity:
1.26
Maximum Temperature:
100
Maximum Hardness:
70
Gravity Tolerance:
+/-0.02
Hardness Tolerance:
+/- 5
Material:
N767R
Minimum Temperature:
-35
Color:
Black