English
Type A - TWVA00100-H7T50
V-Ring type A is the most common and available for shaft diameters from 3 to 1000 mm. It is an all-rubber seal for rotary shafts, rotating with the shaft and sealing axially against the stationary counterface. Its light lip pressure generates low friction. It can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.
Rotary/V-Ring:
Ring Diameter Inside9 mm
TSS Article Number (3 to 9)VA00100
Signature StandardTWVA00100-H7T50
Type of Article0
Quality (10th Digit)-
Root Ring Inside Diameter9 mm
Compound codeH7T50
Ring Thickness3 mm
Ring Width5.50 mm
Root Ring Width5.50 mm
Article GroupTW
Root Ring Thickness3 mm
Material Information for the product(s) on this page
H7T50
Material Type:
HNBR
Material Code Class:
Elastomer
Specific Gravity:
1.23
Shore A Hardness:
70+/- 5
Color:
Black
Material:
H7T50
Maximum Hardness:
70
Minimum Temperature:
-30
Gravity Tolerance:
+/-0.03
Gravity Unit:
g/cm³
Maximum Temperature:
130
Hardness Tolerance:
+/- 5
Hardness unit:
Shore A
Minimum Hardness:
70