English
Type A - TWVA00100-VDT51
SAP Article number: 200000024843
V-Ring type A is the most common and available for shaft diameters from 3 to 1000 mm. It is an all-rubber seal for rotary shafts, rotating with the shaft and sealing axially against the stationary counterface. Its light lip pressure generates low friction. It can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.
Rotary/V-Ring:
SAP Article number200000024843
Ring Diameter Outside20 mm
Ring Diameter Inside9 mm
TSS Article Number (3 to 9)VA00100
Signature StandardTWVA00100-VDT51
Quality (10th Digit)-
Compound codeVDT51
Ring Thickness3 mm
Ring Width5.50 mm
Article GroupTW
Material Information for the product(s) on this page
VDT51
Shore A Hardness:
65+/- 5
Minimum Hardness:
65
Gravity Unit:
g/cm³
Material:
VDT51
Specific Gravity:
2.09
Hardness Tolerance:
+/- 5
Material Type:
FKM
Color:
Brown
Maximum Temperature:
175
Minimum Temperature:
-30
Gravity Tolerance:
+/-0.05
Material Code Class:
Elastomer
Hardness unit:
Shore A
Maximum Hardness:
65