English
Type S - TWVS00120-E7T50
SAP Article number: 200000104167
V-Ring type S is wide and tapered, which provides a very firm hold on the shaft. The rings are available for shaft diameters from 5 to 199 mm. It is an all-rubber seal for rotary shafts, rotating with the shaft and sealing axially against the stationary counterface. Its light lip pressure generates low friction. It can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.
Rotary/V-Ring:
SAP Article number200000104167
Ring Diameter Inside10.50 mm
TSS Article Number (3 to 9)VS00120
Signature StandardTWVS00120-E7T50
Quality (10th Digit)-
Compound codeE7T50
Ring Thickness3 mm
Ring Width7.70 mm
Article GroupTW
Material Information for the product(s) on this page
E7T50
Minimum Hardness:
72
Shore A Hardness:
72+/- 5
Material Code Class:
Elastomer
Color:
Black
Gravity Unit:
g/cm³
Hardness unit:
Shore A
Material:
E7T50
Minimum Temperature:
-40
Maximum Temperature:
110
Hardness Tolerance:
+/- 5
Gravity Tolerance:
+/-0.03
Specific Gravity:
1.16
Maximum Hardness:
72
Material Type:
EPDM