Turcon® Glyd Ring® T - RT0300500-T46V

Joint double effet, activé par un joint en caoutchouc à surface plastique. Comporte un joint torique.

Disponibilité: En stock

€ 23,11
Prix (par pièce)
1-9 € 23,11
10-24 € 19,96
25-49 € 18,18
50-99 € 15,67
100-249 € 13,29
250-499 € 11,81
500+ € 11,25

Mesures de l'installation:

Diamètre de tige, dN f8/h9
50.0  mm
Diamètre de rainure d1 h9
65.1  mm
Largeur de rainure, L1 +0,2
6.3  mm

joint torique:

Taille du joint torique
56.52 x 5.33  mm
Numéro de pièce TSS du joint torique

Qualité et Normes:

Correspond aux recommandations de la norme ISO 3320

Capacités du joint:

Température min.
-10.0  °C
Température max.
200.0  °C
Vitesse max.
15.0  m/s
Pression max.
50.0  MPa
installation drawing table

Informations des matériaux des produits de cette page RT0300500-T46V


Material Data Sheet (PDF) Uniquement disponible pour les clients enregistrés.
greyish to dark brown
Basic Material
Virgin PTFE compounded with Turcon® and bronze
Commercial Description
Turcon® T46 is a blend of PTFE, bronze, and a proprietary Turcon® filler and is backed by years of time-tested performance and offers a balance of performance and cost. This material has a high extrusion resistance and has very good wear properties. For medium to heavy applications with reciprocating movements in mineral oils and other media with good lubrication. Used in article numbers ending in T46N and T46V.


Material Data Sheet (PDF) Uniquement disponible pour les clients enregistrés.
Basic Material
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V