Turcon® Glyd Ring® - RG4500180-T46N

Utilisé avec succès depuis des décennies, le Turcon® GlydRing® est un joint à faible frottement, très efficace et trèsfiable. Il convient particulièrement bien pour réaliserl’étanchéité d’une tige en présence de pressions faiblesou élevées.

Disponibilité: En stock

Prix (par pièce)
4-9 € 6,41
10-24 € 5,28
25-49 € 4,78
50-99 € 4,42
100-249 € 3,89
250-499 € 3,43
500-999 € 3,20
1000-2499 € 2,57
2500+ € 2,50

Mesures de l'installation:

Diamètre de tige, dN f8/h9
18.0  mm
Diamètre de rainure d1 h9
22.9  mm
Largeur de rainure, L1 +0,2
2.2  mm

joint torique:

Taille du joint torique
19.00 x 1.80  mm
Numéro de pièce TSS du joint torique
ORAR00019  

Capacités du joint:

Température min.
-30.0  °C
Température max.
100.0  °C
Vitesse max.
15.0  m/s
Pression max.
50.0  MPa
installation drawing table

Informations des matériaux des produits de cette page RG4500180-T46N

N7

Colour
black
Basic Material
NBR
Commercial Description
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications. Used also as an energizer in T46N, M12N, Z20N, and Z52N.

T46

Colour
greyish to dark brown
Basic Material
PTFE
Filler
Virgin PTFE compounded with Turcon® and bronze
Commercial Description
Turcon® T46 is a blend of PTFE, bronze, and a proprietary Turcon® filler and is backed by years of time-tested performance and offers a balance of performance and cost. This material has a high extrusion resistance and has very good wear properties. For medium to heavy applications with reciprocating movements in mineral oils and other media with good lubrication. Used in article numbers ending in T46N and T46V.