Turcon® Glyd Ring® - RG4500750-T46V

Utilisé avec succès depuis des décennies, le Turcon® GlydRing® est un joint à faible frottement, très efficace et trèsfiable. Il convient particulièrement bien pour réaliserl’étanchéité d’une tige en présence de pressions faiblesou élevées.

Disponibilité: 10-11  semaines

Prix (par pièce)
1-9 € 48,25
10-49 € 41,95
50-99 € 37,11
100-249 € 34,46
250+ € 32,16

Mesures de l'installation:

Diamètre de tige, dN f8/h9
75.0  mm
Diamètre de rainure d1 h9
85.7  mm
Largeur de rainure, L1 +0,2
4.2  mm

joint torique:

Taille du joint torique
78.97 x 3.53  mm
Numéro de pièce TSS du joint torique

Capacités du joint:

Température min.
-10.0  °C
Température max.
200.0  °C
Vitesse max.
15.0  m/s
Pression max.
50.0  MPa
installation drawing table

Informations des matériaux des produits de cette page RG4500750-T46V


greyish to dark brown
Basic Material
Virgin PTFE compounded with Turcon® and bronze
Commercial Description
Turcon® T46 is a blend of PTFE, bronze, and a proprietary Turcon® filler and is backed by years of time-tested performance and offers a balance of performance and cost. This material has a high extrusion resistance and has very good wear properties. For medium to heavy applications with reciprocating movements in mineral oils and other media with good lubrication. Used in article numbers ending in T46N and T46V.


Basic Material
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V