Turcon® Excluder® 2

Le joint Turcon® Excluder® 2 est un joint racleur double effet, activé par un joint torique, qui a deux fonctions : a) racler les contaminants de la tige du piston qui se rétracte pour prévenir la pollution du système et b) maintenir le film d’huile résiduel sur la tige du piston qui se déploie du côté du milieu. Le joint torique maintient la pression pendant que le joint Excluder® 2 exécute le raclage. Excellentes propriétés en matière de glissement et sans broutage.

Capacités du joint

  • Gamme de tailles: 10 mm à 240 mm
  • Température: -30 °C à 200 °C
  • Vitesse (max)  15 m/s

Informations des matériaux des produits de cette page

M12
Colour
dark grey
Basic Material
PTFE
Filler
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.
T46
Colour
greyish to dark brown
Basic Material
PTFE
Filler
Virgin PTFE compounded with Turcon® and bronze
Commercial Description
Turcon® T46 is a blend of PTFE, bronze, and a proprietary Turcon® filler and is backed by years of time-tested performance and offers a balance of performance and cost. This material has a high extrusion resistance and has very good wear properties. For medium to heavy applications with reciprocating movements in mineral oils and other media with good lubrication. Used in article numbers ending in T46N and T46V.
N7
Colour
black
Basic Material
NBR
Commercial Description
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications. Used also as an energizer in T46N, M12N, Z20N, and Z52N.
V7
Colour
green
Basic Material
FKM
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V
Nº produit Matériaux Diamètre de tige, dN f8/h9 (mm) Diamètre de rainure d3 h9 (mm) Largeur de rainure, L3 +0,2 (mm) Prix
(par pièce)
Quantité
(pièces)
Total
Montant