Turcon® Excluder® 2 - WE3100220-M12V

Joint racleur double effet avec deux lèvres de raclage géométriquement différentes. Comporte un joint torique.

Disponibilité: En stock

Prix (par pièce)
1-9 € 30,33
10-24 € 28,48
25-49 € 15,87
50-99 € 10,37
100-249 € 7,68
250-499 € 5,76
500+ € 4,74

Mesures de l'installation:

Diamètre de tige, dN f8/h9
22.0  mm
Diamètre de rainure d3 h9
28.8  mm
Largeur de rainure, L3 +0,2
5.0  mm
Diamètre d'alésage, D4 H11
23.5  mm
Largeur de pas, a min.
2.0  mm
Rayon, r1 max.
0.8  mm

joint torique:

Dimensions du joint torique
23.47 x 2.62  mm
Numéro de pièce TSS du joint torique
ORAR00119  

Qualité et Normes:

Conforme aux recommandations de la norme ISO 3320
oui  
Installation dans les rainures conformément à la norme ISO 6195 type D
oui  

Capacités du joint:

Température min.
-10.0  °C
Température max.
200.0  °C
Vitesse max.
15.0  m/s
installation drawing table

Informations des matériaux des produits de cette page WE3100220-M12V

M12

Colour
dark grey
Basic Material
PTFE
Filler
Virgin PTFE compounded with Turcon®, mineral fibre and additives
Commercial Description
Turcon® M12 is a modern compound and the new standard industrial material. A development of thorough benchmarking and performance testing, Turcon® M12 offers low friction, high wear resistance and costs on par with standard bronze-filled compounds. This material is designed to be the first choice for seals used with linear motion, replacing standard (medium-filled) industrial bronze-filled compounds. Used in article numbers ending in M12N and M12V.

V7

Colour
green
Basic Material
FKM
Commercial Description
A 70 durometer FKM. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures. Used as an energizer in T46V and M12V