Turcon® Roto Glyd Ring® - tenuta interna - TG3200600-T40N

Tenuta a doppio effetto energizzata da un O-Ring, utilizzata per giunti rotanti, oscillanti o con movimenti elicoidali, steli ed alberi. Disponibile nella versione a singolo effetto per elevate velocità di rotazione.

Disponibilità: 11-12  settimane

Prezzo (per articolo)
1-9 € 25,10
10-24 € 20,02
25-49 € 19,35
50-99 € 17,15
100-249 € 14,90
250-499 € 13,21
500+ € 12,65

Dimensioni di installazione:

Diametro stelo, dN f8/h9
60.0  mm
Diametro scanalatura, d1 h9
71.0  mm
Larghezza scanalatura, L1 +0,2
4.2  mm

O-Ring:

Dimensione O-Ring
63.09 x 3.53  mm
O-Ring TSS N. parte
ORAR00230  

Capacità di tenuta:

Temperatura min.
-30.0  °C
Temperatura max.
100.0  °C
Velocità max.
2.0  m/s
Pressione max.
20.0  MPa
installation drawing table

Informazioni sui materiali per il/i prodotto/i di questa pagina TG3200600-T40N

N7

Colour
black
Basic Material
NBR
Commercial Description
A 70 durometer, NBR elastomer. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications. Used also as an energizer in T46N, M12N, Z20N, and Z52N.

T40

Colour
grey
Basic Material
PTFE
Filler
Virgin PTFE compounded with carbon fibre
Commercial Description
Turcon® T40 is a carbon-filled PTFE material commonly used in applications where a low-lubricating hydraulic fluid is used. This material is often used in high-freqency and short stroke applications. Because of the surface texture of this material, it is best used for sealing liquids as opposed to gasses.